Plena Power Amplifier BOSCH PLE‑1P120‑EU

Features

120 W power amplifier in a compact housing

1 V line level balanced input

70 V, 100 V and 8 ohm outputs

100 V input for slave operation on 100 V speaker line

Temperature-controlled forced front to back ventilation (directly stackable)

 

The PLE-1P120-EU are high-power plug-and-play cost effective power amplifiers

that deliver 120Watts to constant voltage or 8 ohm loads. Built with premium quality and

protections, they offer basic functionality at a budgetprice. The amplifiers offer straight 1 V and 100 V line

in, and 70 V, 100 V and 8 ohms out. They can extendthe power of the PLE- series mixer amplifiers or be

combined with the PLE-10M2-EU mixer, or workanywhere where more power on an existing 100 V lineis needed or when a line level signal is provided.

 

Electrical

Mains power supply

Voltage115 – 230 VAC ±10%,50/60 Hz

Inrush Current 4.5/9 A (230/115 VAC)

Power consumption 380 VA

Battery power supply

Voltage24 VDC, +10% / -15%

Current 5.5 A

Charge current0.5 ADC

Charge float voltage27.3 VDC

Power consumption

Max power (mains)227 W, -6dB (mains)130 W,Idle (mains)12 W

Max power (24 V),7 A (150 W),-6 dB (24 V),4.4 A (194 W),Idle (24 V)0.3 A (7 W)

Performance

Max / rated power  180 W / 120 W

Power reduction on backup power – 1 dB

Frequency response  50 Hz to 20 kHz (+1/‑3 dB @‑10 dB ref. rated output)

Distortion<1% @ rated output power,1 kHz

Inputs

Connector 1 : 3-pin XLR, balanced

Sensitivity1 V ,Impedance20 kohm

Connector 2:3-pin Euro style, balanced

Sensitivity100 V, Impedance300 kohm

Dynamic range100 dB

CMRR (mic)>40 dB (50 Hz to 20 kHz)

Loudspeaker outputs 70 V / 100 V

ConnectorEuro style pluggable screwterminals

Loudspeaker output 8 ohm

ConnectorEuro style pluggable screwterminals31 V (120 W)

Mechanical

Dimensions (H x W x D):100 x 430 x 270 mm(19″ wide, 2U high)

Mounting:Stand-alone, 19″ rack

Color:Charcoal

Weight :Approx. 10.5 kg